Installation Instructions; Installation; Anti-Tumble Measures - Hitachi CMP307XE User Manual

Hide thumbs Also See for CMP307XE:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com

INSTALLATION INSTRUCTIONS

Installation

No stand is provided with this product. When installing the monitor, use the optional Desk-top Stand
(CMPAD03), Wall Mount Unit CMPAK04 or Ceiling Mount Unit (CMPAT04).
The Desk-top Stand has been used for the illustrations in this manual.
Use one of the special mount units to install this product. A mount of insufficient strength or
inadequate design can cause overturning or dropping and result in fire, electrical shock or injury.
Please note that this company assumes absolutely no responsibility for personal injuries or
property damage caused by use of other mount units or improper installation.
Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not attempt
this work yourself. Ask your dealer to provide the name of a qualified installer.
In order to prevent an internal temperature increase, maintain a space of 10cm or more between
the sides and other objects such as walls, etc., so that the ventilation holes are not blocked.
■Desk-top Stand
Type : CMPAD03
External dimensions :
650 (W) x 251 (H)x 300 (D) (mm)

Anti-tumble measures

Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to
avoid possible physical injury.
Securing to a wall or post
Using M4 screws (two), fasten the hooks included to the screw holes at
both ends of the top of the rear of the set as shown.
Using a commercially available cord, chain and clamp, secure the set to a
firm wall or post.
Securing desktop
Using wood screws (two), fasten the set to the clamping screw holes on the
rear of the stand as shown.
Using commercially available wood screws, secure the set firmly in
position.
■ Wall-mount unit
Type : CMPAK04
Angle change type :
0 ~ 20° Adjustment five steps is possible.
External dimensions :
675 (W) x 560 (H)x 77 (D) (mm)
(for only desk-top stand, CMPAD03)
*
■ Ceiling mount unit
Type : CMPAT04
Angle change type :
0 ~ 25° Adjustment five steps is possible.
External dimensions :
480 (W) x 959 (H)x 330 (D) (mm)
Screw
Hook
Cord or Chain
10cm or more*
Clamp
Cord
or
chain
Wood screw
Two places
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmp307xu

Table of Contents