Table of Contents
Advertisement
CONNECTING PLASMA DISPLAY MONITOR TO AVC BOX
1.
From the owner's accessory you will find the Monitor Connector cable.
2.
Firmly, and securely insert the Monitor Connection Cable to the rear panel of the AVC box "TO MONITOR" connectors.
3.
Insert the other ends of the Monitor Connection Cable to the display monitor rear panel "FROM AVC" connectors.
To AC
outlet
NOTE:
The Display Monitor and the AVC Center have their own AC Power. Both AC cords must be completely plugged in to
the AVC Center and the display monitor, then plug them in to the AC outlets.
CONNECTING EXTERNAL VIDEO SOURCES
The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following
examples:
Front panel of AVC
PHONES
NOTES:
1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture
may be abnormal.
2. If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable.
3. If you have a mono VCR, insert the audio cable into the left audio jack of your AVC box.
4. S-VIDEO input takes priority over VIDEO input.
5. If you have a VHS or 8mm camcorder, use the S-VIDEO cable in place of the VIDEO cable.
Back of Display Monitor
32/42"
Core
Please use HITACHI specified cable.
TO MONITOR
Back of AVC Center
AC IN
TruBass SRS and
symbol are trademarks of SRS Labs, Inc.
To AC
outlet
INPUT 5
AUDIO
S-VIDEO
L/(MONO)
R
VIDEO
Back of Display Monitor
50"
Core
Please use HITACHI specified cable.
TO MONITOR
Back of AVC Center
AC IN
TruBass SRS and
symbol are trademarks of SRS Labs, Inc.
Front panel of AVC
INPUT 5
PHONES
AUDIO
S-VIDEO
VIDEO
L/(MONO)
R
13
To AC
outlet
To AC
outlet
Advertisement
Table of Contents
