Brother DCP-7055W User Manual page 42

Toner Low
Toner Low
If the LCD shows Toner Low, buy a new
toner cartridge and have it ready before you
get a Replace Toner message.
Replace Toner
When the following message appears on the
LCD, you need to replace the toner cartridge:
Replace Toner
The machine will stop printing until you
replace the toner cartridge. A new and
unused original Brother toner cartridge will
reset the Replace Toner mode.
Note
To force the machine to continue printing
after the LCD shows Replace Toner,
set the machine to Continue mode (Press
Menu, press a or b to choose 1.General
Setup and press OK, press a or b to
choose 4.Replace Toner, and press
OK, press a or b to choose Continue and
press OK. The machine will continue
printing until the LCD shows Toner
Ended. (For details about the Toner
settings, see Toner Settings in Chapter 1
of the Advanced User's Guide.)
34
Toner Ended
A
Toner Ended
The machine stops printing until you replace
the toner cartridge with a new one. (See
Replacing the toner cartridge on page 34.)
Replacing the toner cartridge
A
a
Make sure that the machine is turned
on.
b
Open the front cover and leave the
machine turned on for 10 minutes to
cool down.
A
A