Removing The Chassis Intrusion Switch; Replacing The Chassis Intrusion Switch - Dell OptiPlex XE Service Manual

Back to Contents Page
Chassis Intrusion Switch
Dell™ OptiPlex™ XE Service Manual—Desktop
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Chassis Intrusion Switch

NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in Before Working Inside Your
2. Disconnect the chassis intrusion-switch cable from the system board.
3. Slide the chassis intrusion switch out of its slot in the metal bracket, and push down the switch to remove it from the computer.

Replacing the Chassis Intrusion Switch

To replace the chassis intrusion switch, perform the above steps in reverse order.
Back to Contents Page
Computer.