Removing The Fan; Replacing The Fan - Dell OptiPlex XE Service Manual

Hide thumbs Also See for OptiPlex XE:
Table of Contents

Advertisement

Back to Contents Page
Fan
Dell™ OptiPlex™ XE Service Manual—Desktop
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Fan

NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
Before Working Inside Your
2. Remove the
front
panel.
3. Remove the
optical
drive.
4. Remove the
secondary hard
5. Remove the
primary hard
drive.
6. Remove the
heat-sink
fan.
7. Disconnect the fan cable from the system board.
8. Release the fan cable from its routing guide on the chassis.
9. Remove the screws that secure the fan to the chassis.
10. Remove the fan from the computer.

Replacing the Fan

To replace the fan, perform the above steps in reverse order.
Back to Contents Page
Computer.
drive.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents