g.
Fan (see
h.
Heat sink (see
i.
Modem module (see
Remove the ExpressCard/audio assembly:
1.
Position the computer right-side up, with the front toward you.
2.
Disconnect the speaker cable from the assembly (1).
3.
Remove the two Torx T8M2.5×8.0 screws (2) that secure the assembly to the base enclosure.
4.
Lift the right side of the assembly (3) until the audio connectors disengage from the openings in
the base enclosure.
5.
Remove the assembly from the base enclosure.
Reverse this procedure to install the ExpressCard/audio assembly.
94
Chapter 4 Removal and replacement procedures
Fan on page
74)
Heat sink on page
Modem module on page
76)
92)