Advertisement
Acer AT110 F2 Specifications
Technical specifications
®
PCIe
specifications
The primary I/O bus for the main board is PCIe Gen2. The following table lists the characteristics of the
PCI-E bus segments. Details about each bus segment follow the table.
NOTE: The signaling bit rate of PCI Express is 2.5Gbit/s one direction per lane for Gen 1 and 5.0Gbit/s one
direction per lane for Gen 2.
Expansion
Number
slot
PCIe x16
1
PCIe x8
1
PCIe x4
1
PCI
1
NOTE:
1. Indicates the number of physical electrical lanes running to a PCIe
2. Default bus assignment (in decimal). Inserting cards with PCI™ bridges may alter the actual bus
assignment number.
3. Slots are enumerated differently based on the operating system. Microsoft® operating systems
enumerate Device ID by bus starting from the lowest bus to the highest.
Onboard storage specifications
Item
Controller
Simultaneous drive transfer
channels
Max throughput per channel
Data transfer method
Drive type supported
RAID levels support
RAID function support
RAID OS support
Type
Bus width
PCIe Gen2
x16
PCIe Gen2
x4
PCIe Gen2
x2
PCI
32 bit
Description
Intel C202 onboard controller
6 onboard SATA ports
3 Gb/s
Non-RAID mode
•
RAID mode
•
Serial ATA
RAID 0, 1, 10, 5 (Intel software RAID)
•
RAID 0, 1, 10 (LSI software RAID)
•
NOTE: Intel software RAID only supports Windows OS
LSI software RAID available about 2011 Q1
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility Installation
scripting support
NOTE: This controller does not support hot plug or LED functions
• Windows Server
• Windows Server 2008 R2
• Windows Server 2003
• Red Hat Enterprise Linux 6
1
Voltage
Connector
3.3V
x16
3.3V
x8
3.3V
x4
3.3V
PCI
®
connector.
®
2008
Location
Length
Onboard
Full height
Onboard
Full height
Onboard
Full height
Onboard
Full height
5
Advertisement
