Auto Clock Set - Hitachi DV-RF7U Instruction Manual

Auto Clock Set

This menu is used to set the current time. You need to set
the time to use timer recording.
With the unit in Stop mode, press the MAIN MENU
1
button.
No Disc
System
Setup
Clock Set
Timer Rec.
Channel Set
Language
Audio
Video
Parental Control
MOVE SELECT
Using the 34 buttons, move the selection bar to
2
"Setup", then press the 1 or ENTER buttun to select.
Select "Clock Set" using the 34 buttons, then press
3
the 1 or ENTER button.
No Disc
System
Setup
Clock Set
Timer Rec.
Channel Set
Language
Audio
Video
Parental Control
MOVE SELECT
Setup
EXIT
RETURN
Setup
RETURN EXIT
Select "Auto Clock Set" using the 34 buttons, then
4
press the 1 or ENTER button.
No Disc

Auto Clock Set

Setup
Manual Clock Set
Timer Rec.
MOVE SELECT
I You must have the antenna connected to set the
Auto Clock. See page 16-17 for Antenna
Note
Connections
I The clock will be automatically set when you turn
off the recorder.
Select the sub menu (Clock Data CH, Time Zone or
5
Daylight Saving) using the 34 buttons, then press
the 1 or ENTER button.
No Disc
Clock Data CH
Setup
Time Zone
Timer Rec.
Daylight Saving
MOVE SELECT
Clock Data CH
Select a channel that carries a time signal using the 34
buttons then press the 1 or ENTER button. Select Auto to
set the channel automatically.
No Disc
Setup
Timer Rec.
MOVE SELECT
Clock Set
RETURN EXIT
Auto Clock Set
: Automatic
: Automatic
: Automatic
EXIT
RETURN
Clock Data CH
Auto
Select channel :
RETURN EXIT
English - 25