Satellite Link Recording - Hitachi DV-RF7U Instruction Manual

Satellite Link Recording

Connect a device on which reservation standby is possible,
such as a CS tuner, to the LINE IN 1 jacks on the back of
this DVD Recorder-VCR: You can then start recording,
interlocking with the beginning of the broadcast program.
Set the connected device to reservation standby in advance.
1
Press the MAIN MENU button.
2
Use the 34 buttons to choose "Timer Rec.", and
then press the ENTER button.
3
Use the 34 buttons to choose "SA Programming",
and then press the ENTER button.
DVD-RAM(VR)
VCR Plus+ Record
Setup
Timer Record
Timer Rec.
Scheduled Record List
Dubbing
SA Programming
Disc
Navigation
Playlist
Disc Manager
MOVE SELECT
4
Use the 34 buttons to choose "VCR" or "DVD",
and then press the ENTER button.
• The reserved program will be recorded on the
selected device.
68 - English
Timer Record
: Off
EXIT
RETURN
5
Press the POWER button.
• The DVD Recorder-VCR will turn off.
• When the reserved program begins, recording will
start simultaneously.
• "SA" and " " will appear in the display of DVD
Recorder-VCR.
• If the signal from the connected device is
interrupted, recording will stop and the DVD
Recorder-VCR will automatically turn off.
I Sometimes, when the DVD Recorder-VCR senses
that the reserved program has begun and starts
Note
recording, the beginning of program may not be
recorded.
I Satellite link recording is not possible using the S
VIDEO IN, LINE 2 (L2) or DV IN jack.
I Choose "Off" in step 4 above to release satellite
link recording.
I Satellite link recording will not work during timer
recording: If signals are input to the LINE IN 1
jacks when timer recording has finished, the DVD
Recorder-VCR will turn off, and then satellite link
recording will start.
I Even if timer preset time is reached during satellite
link recording, satellite link recording will have pri-
ority.
I If satellite link recording has been set, the fan will
still rotate after the DVD Recorder-VCR turns off.