Quick Overview - Hitachi DV-RF7U Instruction Manual

Connecting &
Setting Up
• Quick Overview . . . . . . . . . . . . . . . . 15
• Unpacking . . . . . . . . . . . . . . . . . . . . 16
• Connecting the Antenna Cable . . . . 16
• Connecting the Video Cable . . . . . . 17
• Connecting the Audio Cable . . . . . . 19
• Connecting External Devices . . . . . 21
• Connecting the Power Cord . . . . . . 22
• Preparing the Remote Control . . . . 22

Quick Overview

A Quick Overview presented in this guide will give you
enough information to start using the recorder.
Step 1 : Unpacking
4
Step 2 : Connecting the Antenna Cable
4
Step 3 : Connecting the Video Cable
4
Step 4 : Connecting the Audio Cable
4
Step 5 : Connecting External Devices
4
Step 6 : Connecting the Power Cord
4
Step 7 : Preparing the Remote Control
• Note to CATV system installer: This reminder is
provided to call CATV system installer's attention to
Article 820-40 of the National Electrical Code (Section
54 of Canadian Electrical Code, Part I) that provides
guidelines for proper grounding, and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of
cable entry as practical.
English - 15