Making Copies; How To Copy; Stop Copying; Copy Settings - Brother DCP-J925DW Basic User's Manual

4

Making copies

How to copy

The following steps show the basic copy
operation.
a
Make sure you are in copy mode, press
Copy.

The LCD shows:
1 No. of Copies
Press the number box (1) and enter
the number of copies you want.
Also you can enter the number of
copies by pressing
on the screen (as shown above).
b
Do one of the following to load your
document:

Place the document face down in the
ADF.
(See Using the ADF uu page 22.)

Place the document face down on
the scanner glass.
(See Using the scanner glass
uu page 23.)
c
If you want more than one copy, enter
the number (up to 99).
d
Press Mono Start or Colour Start.

Stop copying

To stop copying, press Stop/Exit.
4
1
or
4

Copy settings

You can change the following copy settings.
Press Copy and then press d or c to scroll
through the copy settings. When the setting
you want is displayed, press it and choose
your option.
(Basic User's Guide)
For details about changing the following copy
settings uu page 26.

Paper Type

Paper Size
(Advanced User's Guide)
For details about changing the following copy
settings
uuAdvanced User's Guide: Copy settings

Quality

Enlarge/Reduce

Page Layout

2in1(ID)

Stack/Sort

Density

Ink Save Mode

Thin Paper Copy

Book Copy

Watermark Copy

Duplex Copy

Favorite Settings
Note
If you want to sort copies, use the ADF.
4
4
4
25