Machine Information; Checking The Serial Number; Reset Functions; How To Reset The Machine - Brother DCP-J925DW Basic User's Manual

Machine Information

Checking the serial number

You can see the machine's serial number on
the LCD.
a
Press Menu.
b
Press a or b to display Machine Info.
c
Press Machine Info.
d
Press Stop/Exit.

Reset functions

The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings, such as the
password and IP address information.
2 All Settings
You can restore all settings to their factory
defaults.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.
Note
Unplug the interface cable before you
choose Network or All Settings.
66

How to reset the machine

B
a
Press Menu.
B
b
Press a or b to display
Initial Setup.
c
Press Initial Setup.
d
Press a or b to display Reset.
e
Press Reset.
f
Press to choose which function you
would like to reset.
g
Press Yes to confirm.
B
h
Press Yes for 2 seconds to reboot the
machine.
B