General Specifications; Printing Specifications - Citizen CMP-20 series Technical Manual

1. General Specifications

1.1 Printing Specifications

1) Printing method:
2) Dot density:
3) Printing direction:
4) Printing width:
5) Characters per line(ESC Emulation):
6) Printing speed:
☞ NOTE: Speeds are switched depending on the applied voltage to the printer and head
temperature conditions automatically.
☞ NOTE: There may be variations in printing after switching the mode of the printing
speed. To prevent this for logo printing with ESC* command, using a
downloaded bit image is recommended. Change in printing speed does not
occur during downloaded bit image printing.
7) Line spacing (default):
Thermal line printing
203dpi
Unidirectional with friction feed
48mm(1.88"), 384 dot positions (203dpi)
Font A: 32
Font B: 42
80mm/second maximum
1/6 inch (4.23mm)
Programmable by control command.
- 3 -