Power Sources - Hitachi VM-H38A Instruction Manual

POWER SOURCES

NOTES:
• When replacing the batteries, use 3V micro lithium cell such as Maxell CR2025 or equivalent.
• Instructions for setting the date and time are on page 22. You can do that later if desired after
you're more familiar with your camera/recorder.
• Dispose of battery safely and in accordance with local laws.
• Do not dispose of in fire.
WARNING:
Keep this battery away from children. If swallowed, consult a physician immediately for emergency
treatment.
POWER SOURCES
WHEN USING WITH THE BATTERY (provided)
NOTE: The battery must be charged before it can be used for the first time. Refer to "CHARGING
THE BATTERY" on page 14.
1. Push the "BATT EJECT" lever in the direction of the arrow and hold it, then open the grip
cover.
2. To attach the battery, align the " " mark on the battery with that of the camera/recorder.
3. Hold the battery flush against the camera/recorder and slide it in the direction of the arrow.
4. Close the grip cover.
To remove the battery
1. Push and hold "BATT EJECT" lever, then open the grip cover.
2. Slide the battery downward and off.
12