Hitachi VM-H38A Instruction Manual page 18

MAKING A SAMPLE CAMERA RECORDING
NOTE: If you connect the camera/recorder to your TV, you can see the picture played back on your
TV. Refer to "VIEWING THE PICTURE PLAYED BACK ON YOUR TV" on page 37.
11. After playing, press "STOP" button.
12. Slide the power switch to "OFF" and then slide "EJECT" switch to remove cassette.
13. Always remove the power source from the camera/recorder after use. See "POWER
SOURCES" on page 11.
NOTE: If you have a cassette tape that has already been partially recorded on and you want to
record the remaining blank section, see "QUICK EDIT" on page 31.
18