Ip-Address Set Up; Subnet-Mask Set Up - Barco FLM R20+ Performer User Manual

[ON] = DHCP is activated. Automatic assigning of an address is activated.
[OFF ] = DHCP is deactivated. A fixed address will be used.
Image 13-18

13.4.3 IP-address set up

How to set up?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Network and press ENTER.
The Network menu opens.
4. Use the ▲ or ▼ key to select IP-address and press ENTER to select.
Note: An address contains 4 octets with a maximum value of 255.
This must NOT be 0.0.0.0 for static IP-Address assignment.
5. Use the ▲ or ▼ key to select the desired digit and press ◄ or ► key to select the next digit in the address.
Or,
enter the value with the digit keys on the remote control or local keypad. The next digit in the address will be selected automati-
cally.
6. Press EXIT to return.
Image 13-21
Image 13-24

13.4.4 Subnet-mask set up

How to set up?
1. Press MENU to activate the menus.
R5976921 FLM R20+ PERFORMER 15/03/2010
Image 13-19
Image 13-22
Image 13-20
Image 13-23
13. Projector control
151