Gobo Replacement - American DJ Accu Roller 250 User Instruction

Accu Roller 250™
Channel Value
6 96 - 127
128 - 159
160 - 191
192 - 223
224 - 255
7
0 - 19
20 - 39 COLOR CHANGE TO ANY POSITION
40 - 79
80 - 84
85 - 87
88 - 90
91 - 93
94 - 96 SHUTTER/DIMMER MOTOR RESET
97 - 99
100 - 119
120 - 139
140 - 159
160 - 179
180 - 199
200 - 219
220 - 239
240 - 255
8
0 - 225
226 - 235
236 - 245 BLACKOUT BY WHEEL MOVEMENT
246 - 255
American DJ - www.americandj.com - Accu Roller 250™ Instruction Manual Page 39
®
DMX Traits cont.
Function
SHUTTER OPEN
PULSE EFFECT
SHUTTER OPEN
RANDOM STROBE
SLOW FAST
SHUTTER OPEN
RESET/INTERNAL PROGRAMS
COLOR CHANGE NORMAL
NO ROTATION
ALL MOTOR RESET
SCAN MOTOR RESET
COLOR MOTOR RESET
GOBO MOTOR RESET
NO ROTATION
INTERNAL PROGRAM 1
INTERNAL PROGRAM 2
INTERNAL PROGRAM 3
INTERNAL PROGRAM 4
INTERNAL PROGRAM 5
INTERNAL PROGRAM 6
INTERNAL PROGRAM 7
SOUND ACTIVE
SPEED OF PAN/TILT MOVEMENT
MAX. TO MIN. SPEED
BLACKOUT BY MOVEMENT
NO FUNCTION
Accu Roller 250™
This unit comes with interchangable gobos. Changing the
gobos is a easy procedure. Follow the instructions below.
Caution! Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. To change the gobo, you must remove the top half of the
units body. The top half of the body has the LED display on it
2. Unscrew the four phillips screws on the front of the body.
Remove the top half shell of the body.
3. When you remove the top shell you will be able to access the
gobo wheel. Turn the wheel with your hand until you come
across the gobo you would like to change.
4. Remove the fixation-ring with a small flat-head screwdriver
or pair of needle nose pliers. Push the gobo out towards the
front. When doing this you do not need a lot of pressure.
5. Change the gobo, replace the fixation-ring, and reassemble
the unit.
American DJ - www.americandj.com - Accu Roller 250™ Instruction Manual Page 40
®

Gobo Replacement