Gobo Replacement - American DJ Vizi Spot 5R User Instructions

Vizi Spot 5R
Channel Value
13 RESET & INTERNAL PROGRAMS
97 - 99
100 - 119
120 - 139
140 - 159
160 - 179
180 - 199
200 - 219
220 - 239
240 - 255
American DJ - www.americandj.com - Vizi Spot 5R Instruction Manual Page 51
®
13 Channel DMX Mode
Function
OTHER MOTOR RESET
INTERNAL PROGRAM 1
INTERNAL PROGRAM 2
INTERNAL PROGRAM 3
INTERNAL PROGRAM 4
INTERNAL PROGRAM 5
INTERNAL PROGRAM 6
INTERNAL PROGRAM 7
SOUND ACTIVE PROGRAM
Vizi Spot 5R
This unit comes with interchangable gobos. When changing the
gobos please be very careful. Follow the instructions below.
Caution! Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. To change the gobo, you must remove the bottom half of the
moving head. The bottom half of the moving head does not
have the lens in front. The lens is on the top half of the head.
2. Unscrew the 4 phillips screws that secure the bottom half
shell. The screws will "pop" up when loose, they cannot be
removed. Remove the bottom half of the shell.
3. When you remove the shell you will be able to access the
gobo wheel. Turn the wheel with your hand until you come
across the gobo you would like to change.
4. You have to remove the individual gobo assembly. Using a
pair of pliers, grab the small metal tab that sticks up from
the gobo frame assembly, and gently pull the gobo assembly
out.
5. Once the gobo frame has been removed, remove the fixture-
ring and gobo. Be very careful removing the fixture-ring, it
can "spring" out.
6. Change the gobo, replace the fixture-ring. When inserting
the gobo assembly back into the unit, the bottom of the
gobo assembly must slide underneath the metal place
holder located near the bottom of the gobo wheel.
7. Reassemble the unit.
American DJ - www.americandj.com - Vizi Spot 5R Instruction Manual Page 52
®

Gobo Replacement