Table of Contents
Advertisement
13. Send & Receive
Send and Receive are two functions used when you want to transfer information from one DMX Duo to
another.
1.
Using an XLR cable connect from the output of your master unit (unit that contains the
programs) into the input of your slave unit (unit that contains nothing or something you wish
to overwrite).
2.
On your master unit, press and hold down the "SEND" button and simultaneously press
chase buttons 1, 6, 8, 1, 6, 8 in sequence. As a result, the send LED will illuminate and the
LCD will display "SEnd" indicating it is ready to send information.
3.
On your slave unit, press and hold down the "RECEIVE" button and simultaneously press
chase buttons 1, 6, 8, 1, 6, 8 in sequence. As a result, the receive LED will illuminate and the
LCD will display "IN" and is now ready to receive information.
4.
Press "SEND" on your master unit and the information will begin to transfer to your slave
unit. Once complete, the LCD on both your master and slave units will display
"END" indicating that the transfer is complete.
5.
Press "BLACK-OUT" to exit.
14. Blackout Setup
This feature allows you to set your DMX Duo to activate or deactivate black out on power up. Deactivating
allows you to automatically begin playback of chases and shows on power up.
1.
Flip the power switch to the "OFF" position.
2.
Press and hold the "FADE" and "SHOW 2" buttons simultaneously and flip the power
switch to the "ON" position. As a result, the LCD will display "Y-BO" or "N-BO" depending on
the current active setting.
3.
If you wish to have blackout active on power up, press the "FADE" button so the LCD
display's "N-BO". If you wish to deactivated black out on power up, press the "FADE" button
so the LCD display's "Y-BO".
4.
To confirm your blackout setting, press the "BLACK-OUT" button.
15. Erase all memory
Use this function only if you wish to completely erase every chase and show currently stored in your DMX
Duo.
1.
Flip the power switch to the "OFF" position.
2.
Press and hold the "RECORD", "SPEED", "SHOW 1" and "BLACK-OUT" buttons and
simultaneously flip the power switch to the "ON" position. All memory will now be erased.
10
Advertisement
Table of Contents
