Page 2
(PwrOn), and then AutoMute (aMute). and visual band alerts,and all the perfor- Program. mance you’d expect from Beltronics. 3 Release the RVW button when the Pro100 shows the In addition,the Pro100 introduces the 2 Then press the RVW button to review the AutoMute item.
Quick Reference Table of Contents Quick Reference Guide Programming 11-14 Installation • How to use Programming • Power Connection • Example of Programming Press the RVW button Press the CHG button to go from one category to change your setting to the next within a category •...
Quick Reference Guide To begin using your Pro100, QuickMount Slot Radar Antenna and Laser Lens Rear Laser Port Insert the Pro100’s adjustable Windshield The rear panel of your Pro100 should have Receives laser signals from behind the just follow these simple steps mount into this slot.
Pro100 (by the word vehicle owner’s manual to determine if Where to mount your Pro100 BELTRONICS) and slide the QuickMount your windshield has this coating. Your Pro100 operates on 12 volts DC For optimum detection performance,we bracket into the slot until it is locked into negative ground only.The lighter plug...
Controls and Features Power Voice Alerts Highway / City Button Dark Mode To turn your Pro100 on or off,press the The Pro100 provides digital voice The City button selects the Pro100’s When you select the Dark mode with the PWR button located on the top.When you announcements of radar and laser bands sensitivity mode.We recommend the BRT switch,your Pro100 changes to a very...
Controls and Features Programming Audible Alerts Power Connector There are 6 user-selectable options so you An example can customize your Pro100 for your own Here is how you would turn your Pro100’s The Pro100’s power jack uses a telephone- preferences.The buttons labeled CITY and AutoMute feature off.
Overview of Programming Details of Programming Pilot (Power-on indication) Power-on Sequence Press the REVIEW button Press the CHANGE button to go from one category to change your setting NOTE:When you are using the Dark mode, (Standard) PwrOnSTD to the next within a category the display will only show HD or CD In this setting,each time you turn on your...
Details of Programming Technical Details City Mode Sensitivity Bands Features and Specifications (Standard) City STD BandsDFT In this setting,when you put your Pro100 In this setting,all North American radar and Operating Bands Sensitivity Control in the City mode,X-band sensitivity is laser frequencies are monitored.This is the •...
Technical Details Interpreting Alerts Alert Explanation the type of transmission (continuous or Although the Pro100 has a comprehensive instant-on) and the location of the radar warning system and this handbook is as The Pro100 alerts slowly for a while and then You are approaching a radar unit concealed source affect the radar alerts you receive.
Technical Details How Radar Works How Laser (Lidar) Works Radar range also depends on the There are limitations to LIDAR Traffic radar,which consists of microwaves, power of the radar equipment itself. Laser speed detection is actually LIDAR equipment.LIDAR is much more sensitive travels in straight lines and is easily The strength of the radar unit’s beam (Light Detection and Ranging).LIDAR...
Technical Details TSR Traffic Signal Rejection Software How Safety Radar Works SWS Text Messages Weather Related Hazards Highway Construction or Maintenance Your radar detector includes a new Safety Warning System,or SWS,uses a High Wind Ahead optional boost in anti-falsing software to modified K-band radar signal.The SWS safety Work Zone Ahead Severe Weather Ahead...
The Pro100 is running a self-calibration test • A loose power connection or dirty lighter socket can cause The Pro100’s power-on sequence Service the Pro100 to be briefly disconnected. The Pro100 has failed the calibration test.Contact Beltronics for repair reoccurs while you are driving. Required...
Product free of charge. ABILITY AND SUITABILITY OFTHE PRODUCT basis.If it exceeds the basic repair charge, What we will not do: BELTRONICS will not FOR A PARTICULAR PURPOSE.BELTRONICS Call us at 1-800-341-2288.We may be you will be contacted with a quotation.
Need help?
Do you have a question about the Ultimate Pro 100 and is the answer not in the manual?
Questions and answers