Table of Contents
Advertisement
Installation
Connecting the LCD Rack Console with Multiple
PRO3 KVM Switches (Daisy-Chaining)
You can daisy-chain up to 15 additional PRO3 KVM Switches
(F1DA104Zea,F1DA108Zea, F1DA116Zea, F1DA104Qea, F1DA108Qea, and
F1DA116Qea), allowing a server administrator to manage up to a maximum of
256 servers from one console. Each daisy-chained PRO3 KVM Switch is referred
to as a "BANK" and is assigned an address. The LCD Rack Console is BANK
00 and is referred to as the "primary" KVM switch. BANKs 01 through 15 are
referred to as "secondary" KVM switches.
Note: The LCD Rack Console (F1DC108BxxSR, F1DC116BxxSR) must be
designated as the primary KVM switch. Refer to the diagram below.
cable 1
cable 2
cable 3
Note: A Daisy-Chain Cable (F1D108-CBL) is required to daisy-chain each
PRO3 KVM Switch and is available through your Belkin reseller, or online at
www.belkin.com
14
Primary unit (BANK 00)
Secondary unit ( BANK 01)
Secondary unit ( BANK 02)
Secondary unit ( BANK 03)
Advertisement
Table of Contents
