Routing
This section defines routing related parameters, including static routes,
RIP (Routing Information Protocol) parameters and routing table.
Static Routes
You can configure static routes in this screen.
To add a static route entry to the table, click Add. To change an existing
entry, click Edit. To delete an entry, click Delete.
Figure 64 Static Routes Screen
This screen shows a list of current static route entries. For each entry, the
following information is displayed:
■
■
■
A network address of 0.0.0.0 and a subnet mask of 0.0.0.0 indicates the
default route.
■
■
After you have finished making changes to the table, click SAVE
SETTINGS.
Index — the index of the entry.
Network Address — the network address of the route.
Subnet Mask — the subnet mask of the route.
Gateway — the router used to route data to the network specified by
the network address.
Configure — Allows you to edit existing routes.
Advanced Settings
85