Lan Settings - 3Com WL-550 User Manual

■
■
■

LAN Settings

Your Router is equipped with a DHCP server that will automatically assign
IP addresses to each computer on your network. The factory default
settings for the DHCP server will work with most applications. If you need
to make changes to the settings, you can do so.
The LAN settings screen allows you to:
■
■
■
■
■
■
The Router will also provide a list of all client computers connected to the
Router.
INFORMATION: Displays the number of attached clients, the firmware
versions, the physical MAC address for each media interface and for
the Wireless 11g Router, as well as the hardware version and serial
number.
DHCP Client Log: Displays information on DHCP clients on your
network.
Security Log: Displays illegal attempts to access your network.
Save: Click on this button to save the security log file.
■
Clear: Click on this button to delete the access log.
■
Refresh: Click on this button to refresh the screen.
■
Change the default IP address of the Router. The default IP is
192.168.1.1
Change the Subnet Mask. The default setting is 255.255.255.0
Enable/Disable the DHCP Server Function. The default is Enabled.
Specify the Starting and Ending IP Pool address. The default is
Starting: 2 / Ending: 254.
Specify the IP address Lease Time. The default is One Day.
Specify a local Domain Name.
Network Settings 41