Wan Settings - 3Com WL-550 User Manual

WAN Settings

Specify the WAN connection type required by your Internet Service
Provider.
You should see the first entry already contains information that's been
configured using the Setup Wizard in the initial setup. If you want to
change that information or set up other connection, select your
connetion type and click Next to set the detailed settings.
There are five options available for the DSL connection mode:
■
■
■
■
■
Dynamic IP (For Multiple PCs)
To configure the Dynamic IP Address function correctly, you should obtain
the information on this screen from your ISP.
Figure 27 Dynamic IP Mode Screen
Dynamic IP Mode (for multiple PCs) (see
PPPoE — PPP over Ethernet, providing routing for multiple PCs (see
page 44)
PPTP — PPP, providing routing for multiple PCs (see
Static IP Mode (for multiple PCs) (see
BigPond — providing Internet access for Australian users (see
page 47)
Network Settings
page 43)
page
page 46)
43
45)