Setup Menu - Hitachi 37PD5000 User Manual

OPERATING INSTRUCTIONS (continued)

SETUP MENU

MENU
Selected characters
Auto Adjust*
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Frequency Display
WVGA Type
WXGA Mode (55")
Vertical Filter
Frequency Mode
RGB1
RGB2
* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.
20
Picture
Audio
Timer
Function
Setup
Language
Select
OK Set
(Menu)
Pressing the OK button here,
Automatic regulation is started.
Moves the horizontal position Moves the horizontal position
to left. to right.
Moves down the vertical
Moves up the vertical position. Adjust the vertical display position.
position.
Reduces the dot clock Increases the dot clock
frequency (shrinks the right frequency (expands the right
side). side).
Slows the dot clock phase Advances the dot clock phase
(shifts slightly to left). (shifts slightly to right).
(off the function) (waiting to reset)
0.7V
Off
Off
Off 1280x768
Off
Movie
Setup
Auto Adjust
Horizontal Position
OK
Vertical Position
Horizontal Clock
Clock Phase
Reset
Select Return
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Select Return
Setup
Input Level
Frequency Display
WVGA Type
Vertical Filter
Frequency Mode
RGB1
RGB2
Select Set
Adjust
Horizontal Position, Vertical Position, Horizontal Clock and Clock
Phase are adjusted automatically.
Adjust the left-side display position.
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
Adjust for maximum character clarity.
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
Adjust for clear character visibility.
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
The original factory settings for the items of this Menu page can be
restored by pressing the OK button. (This is effective only for RGB2.)
Normally set to 0.7 V. If white is found to spread across the screen, set
1.0V
to 1.0 V. (This is effective only for RGB2.)
Set this to Off if the frequency information of the Input Signal Screen
On
Display is not required.
This is only available for W-VGA signal.
On
When it is set to On, the display area modecan be selected Full or Real.
(RGB2 (ANALOG) INPUT only)···55"
This is only available for W-XGA signal.
1366x768
When it is set to W-XGA mode, the display area modecan be selected Full or Real.
(RGB2 (ANALOG) INPUT only)
On
Turn On when concerned about screen flicker.
PC
Set to Movie when viewing moving images on a personal computer.
Optional (grayed out)
Optional (grayed out)
Adjust
0
OK
+ 31
– 20
10
Reset
Exit
Horizontal Position
Next / Prev
Adjust
OK
0
+ 31
– 20
10
Reset
Exit
Clock Phase
Next / Prev
(37")
Setup
0.7V Input Level
Off Frequency Display
Off WVGA Type
On WXGA Mode
Movie Vertical Filter
DVI-PC Frequency Mode
RGB RGB1
Return RGB2
Select
Setup hint
0
Adjust Return
10
Adjust Return
(55")
0.7V
Off
Off
Off
On
Movie
DVI-PC
RGB
Set Return