No_Authentication_Method_Specified (Id: 01802100); No_Key_Method_Configured_For Tunnel (Id: 01802102); Invalid_Configuration_Of_Force_Open (Id: 01802104) - D-Link NetDefend SOHO DFL-160 Reference Manual

Utm firewall
Hide thumbs Also See for NetDefend SOHO DFL-160:
Table of Contents

Advertisement

2.14.92. no_authentication_method_specified
(ID: 01802100)
Explanation
Gateway Action
Recommended Action
Revision
2.14.92. no_authentication_method_specified (ID:
01802100)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
2.14.93. no_key_method_configured_for tunnel (ID:
01802102)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
2.14.94. invalid_configuration_of_force_open (ID:
01802104)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
rule protocol
Failed to insert rule since forced NAT protocol do not match rule
protocol.
VPN_tunnel_disabled
Reconfigure_IPsec.
1
ERROR
Neither pre-shared keys nor CA certificates nor EAP are specified for
a tunnel
No authentication method is specified for the tunnel.
VPN_tunnel_disabled
Reconfigure_IPsec.
1
ERROR
Tunnel does not specify any keying method (IKE or manual)
No keying method (IKE/manual) is configured for tunnel.
VPN_tunnel_disabled
Reconfigure_IPsec.
1
ERROR
Auto-start rule does not specify single IP address or domain name for
its remote peer
Can not use Auto-start rule (force open) for roaming tunnels.
VPN_tunnel_disabled
Reconfigure_IPsec.
208
Chapter 2. Log Message Reference

Advertisement

Table of Contents
loading

Table of Contents