Failed_To_Send_Response_Code (Id: 00200255); Illegal_Command (Id: 00200267); Packet_Failed_Initial_Test (Id: 00200350) - D-Link NetDefend SOHO DFL-160 Reference Manual

2.1.108. failed_to_send_response_code
(ID: 00200255)
Parameters
Context Parameters

2.1.108. failed_to_send_response_code (ID: 00200255)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Context Parameters

2.1.109. illegal_command (ID: 00200267)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.110. packet_failed_initial_test (ID: 00200350)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
filename
filetype
ALG Module Name
ALG Session ID
NOTICE
FTPALG:Failed to send the response code.
The FTP ALG could not send the correct response code to the client.
none
None.
1
ALG Module Name
WARNING
FTPALG: REST from <peer> not allowed, rejecting command
The client tried to issue a "REST" command, which is not valid since
the client is not allowed to do this. The command will be rejected.
rejecting_command
If the client should be allowed to do issue "REST" commands, modify
the FTPALG configuration.
1
filename
peer
ALG Module Name
ALG Session ID
Connection
WARNING
TFTPALG: Packet failed initial test (Invalid TFTP packet). Packet
length <packet_length>
An invalid TFTP packet was received. Refusing connection.
reject
None.
73
Chapter 2. Log Message Reference