Create_Rules_Failed (Id: 01802081); No_Authentication_Method_Specified (Id: 01802100); No_Key_Method_Configured_For Tunnel (Id: 01802102) - D-Link DFL-260E Log Reference Manual

2.22.91. create_rules_failed (ID:
01802081)
Gateway Action
Recommended Action
Revision

2.22.91. create_rules_failed (ID: 01802081)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
2.22.92. no_authentication_method_specified (ID:
01802100)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
2.22.93. no_key_method_configured_for tunnel (ID:
01802102)
Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
protocol.
VPN_tunnel_disabled
Reconfigure_IPsec.
1
ERROR
Cannot insert this rule, the forced NAT protocol type does not match
rule protocol
Failed to insert rule since forced NAT protocol do not match rule
protocol.
VPN_tunnel_disabled
Reconfigure_IPsec.
1
ERROR
Neither pre-shared keys nor CA certificates nor EAP are specified for
a tunnel
No authentication method is specified for the tunnel.
VPN_tunnel_disabled
Reconfigure_IPsec.
1
ERROR
Tunnel does not specify any keying method (IKE or manual)
No keying method (IKE/manual) is configured for tunnel.
VPN_tunnel_disabled
Reconfigure_IPsec.
1
280
Chapter 2. Log Message Reference