Identifying External Components; Front Panel - D-Link DES-1008F User Manual

I E C
DENTIFYING XTERNAL OMPONENTS
This section identifies all the major external components of the hub. Both the
front and rear panels are shown followed by a description of each panel
feature. The indicator panel is described in detail in the next chapter.

Front Panel

The figure below shows the front panels of the switch.
LED Indicator Panel
Power Indicator (Power)
This LED indicator lights green when the switch is receiving power,
otherwise, it is off.
Full-Duplex/Collision (FDX/Col)
This LED indicator lights green when a respective port is in full duplex (FDX)
mode. Otherwise, it is blinking when collisions are occurring on the
respective port.
(100M LINK/ACT(green), 10M LINK/ACT(amber))
Link/Activity
This LED indicator lights green when the port is connected to a 100Mbps
Fast Ethernet station, if the indicator blinking green will be transmission or
received data on the 100Mbps network. Otherwise, if the indicator lights
amber when the port is connected to a 10Mbps Ethernet station, if the
indicator blinking amber will be transmission or received data on the 10Mbps
network.
7