Table of Contents
Advertisement
U
NPACKING AND
This chapter provides unpacking and setup information for DSS-16+.
Unpacking
Open the shipping cartons and carefully unpacks its contents. The carton
should contain the following items:
One 16-port 10/100M NWay Fast Ethernet Switch
One external power adapter
Four rubber feet to be used for shock cushioning
User's Guide
If any item is found missing or damaged, please contact your local reseller
for replacement.
Installation
The site where you install DSS-16+ may greatly affect its performance.
When installing, consider the following pointers:
Install DSS-16+ in a fairly cool and dry place. See Technical
Specification for the acceptable operating temperature and humidity
ranges.
Install DSS-16+ in a site free from strong electromagnetic source,
vibration, dust, and direct sunlight.
Leave at least 10cm of space at the left and right hand side of DSS-16+
for ventilation.
Visually inspect the DC power jack and make sure that it is fully secured
to the power adapter.
I
DENTIFYING
This section identifies all the major external components of DSS-16+. Both
the front and rear panel is shown, followed by a description of each panel's
feature. The LED indicator panel is described in detail in the next chapter.
I
NSTALLATION
E
XTERNAL
11
C
OMPONENTS
Advertisement
Table of Contents
