Rear Panel - D-Link DES-1008F User Manual

Rear Panel

DC Power Jack: Power is supplied through an external AC power adapter.
Since the switch does not include a power switch, plugging its power adapter
into a power outlet will immediately power it on.
Auto-MDI-X Function ports: Use these jacks (port-1 ~ port-7) to connect
stations to the hub. An Auto-MDI-X function will automatically detect if a
crossover is required and make the swap of Tx pair and Rx pair internally.
With this function, straight-through cable can be used for any connection.
MDI to MDI-X connection rule is not necessary anymore. In the switches, all
TP ports are equipped with this function. You can use just straight-through
type of cables for all your connections.
100BASE-FX Fiber Port: The Fiber port supports 100BASE-FX
62.5/1252m multimode fiber. The TX port has to link to others end RX port,
and the RX port has to link to others end TX port.
Duplex Mode Switch: The switch is to select the operation mode either to
run in full or half duplex mode for 100BASE-FX. When turning the switch to
FDX, the fiber port will run at full duplex or turn to HDX, the fiber will run
at half duplex.
8