Adidas miCoach X_CELL User Manual page 7

5. Click "Pair" to connect to the device. Now you're ready to workout.
12:00
Pairing
Back
pariring
Check the serial number (SN) on your sensor
to make sure you are pairing the right X_CELL.
miCoach X_CELL
The name is only used to identify your sensor in the app.
You can set it new or change it later in sensor settings.
Note:
• To unpair your X_CELL from the multi-sport app, go to the sensor menu
in the app settings and choose "Remove Sensor".
• In case there is an X_CELL device update during pairing, please follow the
steps to update your X_CELL. It only takes a couple of minutes and we
recommend you to do this, to stay up to date with the latest improvements.
x_cell
SERIAL NUMBER
10713260000062
Pair
Trouble-shooting:
If pairing fails, please try the following:
1. Make sure your X_CELL is within 0.5 meters of your smartphone and there
are no other miCoach X_CELL devices in the same range.
2. If there is more than one X_CELL device found by the app and you're
unsure which one is yours, then check that the serial number in the app
matches the serial number on the back cover of the device (see diagram
in section 1.1).
3. Go back to the pairing screen, select "Scan" next to X_CELL, short press the
button on the device and search again.
4. If the X_CELL still isn't detected, you may need to replace the battery (see
section 4 for instructions).
7