Adidas miCoach X_CELL User Manual page 5

1.3 Wearing miCoach X_CELL
There are two ways of wearing the miCoach X_CELL:
1. With the Textile Strap worn around your chest and the miCoach X_CELL
attached to the strap (measures heart rate).
2. With the X_CELL waist clip (doesn't measure heart rate).
Note:
For the most accurate measurements during your workout, we advise you to
activate and wear the X_CELL for a few minutes prior to starting your workout.
Follow these steps to wear the miCoach X_CELL correctly:
Textile Strap Usage
1. Clip the X_CELL onto the two snaps
on the Textile Strap. Ensure the
sensors on the back of the strap
are moistened to pick up your
heart rate.
2. Adjust the Textile Strap to fit tightly
on your torso, with the X_CELL
centred just below your pectoral
muscles or breasts. The adidas
logo should be facing up.
Trouble-shooting:
• Lotions or oil between the skin and the strap may interfere with conductivity,
so you may need to gently cleanse the skin to remove any residue.
• When using the waist clip, if it's not possible to place it exactly in the center,
(for example if your pants have a drawstring), it's okay to place it slightly
to one side.
With an X_CELL waist clip
1. Insert the X_CELL into the clip.
Make sure the on/off button
is inside the ring of the clip and
the adidas logo is visible.
2. Attach the clip onto your shorts,
in the middle of your waist, with
the on/off button facing towards
your body.
5