TRENDnet TW100-BRV304 Quick Installation Manual page 6

Quick Installation Guide
3. Click Setup Wizard on the main menu.
4. Step through the Wizard until finished. Refer to the data
from your ISP, and the table below, to ensure your choices
are correct.
Connection Type
Dynamic IP Address
Specified (Fixed)
IP Address
PPPoE
PPTP, BigPond
5. On the final screen of the Wizard, run the test and check
that an Internet connection can be established.
If the connection fails, check both your data and the
Cable/DSL modem.
If your ISP has recorded your MAC (physical) address,
change the MAC address (on the Wizard's Cable Mo-
dem screen) to match the value expected by your ISP.
Data required.
Usually, none.
But some ISP may require a par-
ticular Hostname, Domain name,
or MAC (physical) address.
IP, Gateway, Subnet Mask and
DNS Addresses allocated to you,
and related information.
Login name and password.
Login name and password,
Server IP Address
Page 5