TRENDnet TW100-BRV304 Quick Installation Manual page 3

Quick Installation Guide
If required, connect any LAN port on the VPN Router
to a normal port on another Hub/Switch, using a stan-
dard LAN cable.
Any LAN port on the VPN Firewall Router will auto-
matically function as an "Uplink" port when required.
3. Connect your DSL/Cable Modem to the WAN port on the
VPN Firewall Router. Use the cable supplied with your
DSL/Cable modem, or a standard network cable.
4. Connect the supplied Power Adapter and power on.
5. Check the LEDs
The Power LED should be ON.
The Status LED should flash, then turn Off. If it stays
on, there is a hardware error.
The WAN LED should be ON.
For each active LAN (PC) connection, the LAN
Link/Act LED should be ON.
Page 2