Quick Installation Guide
Linux Setup using X Windows
Œ
Internet Access
Follow this procedure to set your system to act as a DHCP
client, obtaining an IP Address and related data from the
Broadband VPN Gateway's DHCP Server.
1. Start your X Windows client.
2. Select Control Panel - Network
3. Select the "Interface" entry for your Network card. Nor-
mally, this will be called "eth0".
4. Click the Edit button, set the "protocol" to "DHCP", and
save this data.
5. To apply your changes
Use the "Deactivate" and "Activate" buttons
OR, restart your system.
i
This guide covers only the most common
situations. Please refer to the full User's
Guide for each model on the CD-ROM.
Page 10