Quick Installation Guide
TW100-BRV304 (Advanced VPN Firewall Router)
1. Ensure the Advanced VPN Firewall Router and the
DSL/Cable modem are powered OFF before commencing.
Leave your DSL/Cable modem connected to its wall
socket (phone line or cable input).
2. Use standard LAN cables to connect PCs to the LAN ports
on the Advanced VPN Firewall Router.
If required, connect any LAN port on the Advanced
VPN Firewall Router to a normal port on another
Hub/Switch, using a standard LAN cable. (Any LAN
port will automatically function as an "Uplink" port
when required.)
If desired, connect the DMZ port to a standard port on
another Hub or Switch. PCs connected to this hub will
also gain Internet access, but will NOT be able to ac-
cess the rest of the LAN.
3. Connect your DSL/Cable Modem to the WAN port on the
Advanced VPN Firewall Router. Use the cable supplied
with your DSL/Cable modem, or a standard network cable.
4. Connect the supplied Power Adapter and power on.
Page 3