Charging The Battery - Hitachi VM H 655 LA Instruction Manual

Charging the Battery
The Firststep is to set the battery for charging. To charge the battery, attach it to the camcorder, and connect the
VM-ACE5A AC adaptor. Charge the battery at a temperature range of 50°F (10°C) - 86°F (30°C) to prevent
damage to the battery.
Note: This camcorder operates with a lithium ion battery such as VM-BPL13/VM-BPL27/VM-BPL30/VM-
BPL60.
Note: We cannot be responsible for any malfunctions of the camcorder which occur when you use battery
packs other than those specified.
' _ "_[]
i
i -
Charge the battery on a flat surface this is free of vibration.
1 Make sure the CAM/OFF/VCR switch is set to OFF position.
2 Attach the battery pack to the camcorder.
• Align the bottom of the batter'/with mark _ on the camcorder so that the battery fits into the grooves. Then
slide the battery downward, as illustrated.
Note: Always attach a battery only by the procedure described here. Attaching a battery forcibly could damage it.
g Plug the AC adaptor power cord into an AC outlet.
Make sure that the wide blade fits into the wide slot. If it doesn't fit, try reversing it. If the blades still do not fit fully
into the outlet, either contact an electrician to replace your obsolete outlet, or use a polarized cord or outlet
15