Dubbing All Scenes Recorded On The Hdd ("All") - Hitachi DZ-HS903A Instruction Manual

Dubbing All Scenes
Recorded on the HDD
("All")
You can dub all scenes recorded on
the HDD from the beginning in
sequence.
Connect the AC adapter/charger to
the camcorder (p.38).
1
• Dubbing is not possible if a
battery pack is used as a power
source.
Turn the power switch to "HDD"
2
(p.24).
Press DUBBING.
3
The Dubbing Menu appears.
Select "All", then press the
confirmation button.
4
The "Dubbing(All)" screen
appears.
Choose a disc for dubbing and insert
5
it into the camcorder (p.34).
Check the screen for finalization
setting.
If you are using a DVD-RW (VF
mode) or DVD-R, you can
6
finalize the disc continuously
after dubbing is complete.
Select "YES" to finalize or "NO"
not to finalize.
Select "YES", then press the
7
confirmation button.
Dubbing starts.
84
When another disc is needed to
continue dubbing, a message screen
8
requesting another blank disc
appears. Replace a disc with a new
one.
After the dubbing is complete, the
confirmation screen whether or not
you delete the dubbed scenes
appears.
9
• If you wish to erase the dubbed
scenes, select "YES".
• If you wish to leave them on the
HDD, select "NO".
Remove the disc.
10
• Or press C to end.
Hint
You can also display the Dubbing
Menu from the Disc Navigation
screen. Press , press MENU,
select "Scene" "Dubbing"
"Dubbing Menu", and then press
the confirmation button.