Using The Self-Timer - Hitachi DZ-HS903A Instruction Manual

Switching capture
quality
1
During record pause, press MENU.
Select "Record Functions Setup"
2
"PHOTO Input"
"Frame"/"Field"
Press the confirmation button to
3
confirm, then MENU to end.
Hint
You can confirm the current
"PHOTO Input" mode by the icon
appearing on the LCD screen
(p.42).
CARD

Using the Self-Timer

You can use the self-timer to record
still photos.
During still picture record pause,
1
press MENU.
Select "Record Functions Setup"
2
"Self Timer" "On"
Press the confirmation button to
confirm, then MENU to exit the
3
Menu.
The self-timer is set and "q10"
appears in the LCD monitor (p.42).
Press PHOTO/SELECT halfway
to adjust the focus, then press it all
the way down.
A countdown starts. In the LCD
monitor, the countdown is
shown as follows: "
.... The photo will be recorded
about 10 seconds later.
During countdown, the
recording indicator on the lens
side also flashes.
4
• To cancel the countdown and
return to " 10", press
q
PHOTO/SELECT or C.
• The self-timer operates every
time PHOTO/SELECT is
fully pressed and will not be
set to "Off" until the following
is conducted:
– Set the self-timer to "Off" in
the Menu.
– Turn off the power.
– Switch to movie recording.
10", " 9",
q q
79