Hitachi DZ-HS903A Instruction Manual page 69

Selecting a white
balance mode
1
During record pause, press MENU.
Select "Camera Functions Setup"
2
"White Balance"
mode
Press the confirmation button to
confirm, then MENU to end.
The selected white balance mode
(other than Auto) will appear on
3
the screen (p.42).
• The white balance mode is
retained in memory even when
the power is turned off.
Notes
• Do not block the infrared sensor
a white balance
• If a tele-conversion lens or wide-
• The white balance does not work
with your hand or other things to
obtain a good cast for your
recording.
Infrared sensor
conversion lens is attached, the
white balance may not be
properly adjusted automatically
depending on the conditions. In
such a case, select the appropriate
white balance mode or set the
white balance manually.
properly if you turn on the power
while the lens cap is attached to
the lens. Be sure to remove the
lens cap before turning on the
power.
69