Hitachi DZ-HS903A Instruction Manual page 139

Notes
• If you load a written DVD-RW
into the write drive, the dialog
"Are you sure you want to delete
the content of disc?" will appear.
Deleting the content of the disc
will erase all data on the disc.
Carefully check the contents of
the disc beforehand.
Choosing "Yes" will display the
disc erasure screen. After
checking it, click the "OK"
button. Once the contents on the
disc have been deleted, the disc
compartment on the camcorder
will open. Close the cover
following the message
instructions.
• If the disc contains a video file
that does not conform to DVD-
Video format, the video will be
reformatted, resulting in
deterioration of image quality.
• If you click "File" - "Save
project" before writing is
complete, the operation status can
be saved as a project file. You can
open this saved project file later
to restart the operation from the
saved status.
• A project file will be saved in the
project folder that was designated
when images were saved, and the
file name will be automatically
attached.
• If a video recorded on the HDD in
this camcorder for extended
hours is too long for one disc, cut/
edit the video so that it can be
recorded on one disc. See the on-
line instruction manual of
ImageMixer 3 for cut-editing of
videos. To display the
ImageMixer 3 manual, choose
"Help", and then "ImageMixer 3
Help (H) F1", while ImageMixer
3 is being executed.
139