Strong SRT5431 User Manual page 12

DVR Playing: Select DVR icon. Select the recorded file you want to play, press OK to begin
playback. Press the RECALL key to move up to the next Folder. Press the RED key to switch
between Preview and Full screen modes. Use the YELLOW key to delete the file you don't
want. Press the GREEN key to rename the recorded file if desired.
(2) Photo configure: You can adjust the slide time, slide mode and aspect ratio here.
(3) Movie configure: You can set the Aspect Ratio, Subtitle Specific, Subtitle background and
Subtitle Font-colour here.
(4) DVR configure: Record Device, here you can view information of your connected USB storage
device which includes Format Type, Total and Free space available on drive. You can choose
the option FORMAT to format your USB compatible device in Fat 32 of NTFS formats.
(5) The USB port is also used to perform a software Update:
(a) COPY THE SOFTWARE UPDATE FILE FROM YOUR PC TO A USB FLASH DRIVE
Please visit the STRONG website
department on 1800 820 030 to obtain the latest software for updating your receiver.
1. To upgrade your unit via USB, plug the USB compatible drive to the PC and
backup the entire data of the USB drive. Right click the USB drive and select
Format item. Format the USB drive as FAT32 file system.
NOTE: To perform a software upgrade of the Receiver, please ensure the USB Flash Drive or
Portable hard disk is in FAT32 file system format. The USB port for software updates is
not compatible with USB Flash drives or Portable Hard Disk Drives in NTFS, FAT16 or
U3 PRO File System formats.
2. Copy the update file named "SRT5431.AP" to the root of the USB drive. Then
remove the USB drive from the PC.
(b) UPDATE THE RECEIVER VIA THE USB PORT
1. Plug the USB drive with the update file to the USB port of the receiver.
2. Press the Menu button and then press "666666" to begin the upgrade process. When the upgrade
progress has reached 100% and the update has finished, remove the USB flash drive and power
off and power on the receiver again.
3. To ensure the software upgrade has taken effect, please set the receiver to the factory default
settings via the main menu once the receiver has rebooted.
NOTE: Please do not remove the USB drive from the receiver or power off the receiver during
the upgrade process. This may damage the receiver.
www.strong.com.au
9
or contact our customer service