Using Software; [When Using Windows]; Using Imagemixer 3; When Using Windows Using Imagemixer 3 - Hitachi DZ-B35A Instruction Manual

Using Software

See page 126 when using Macintosh.

[When using Windows]

USING IMAGEMIXER 3

ImageMixer 3 allows you to capture the images recorded on the DVD video camera/recorder into
PC, edit the video file, and create a DVD-Video or DVD-VR using the video file.
The following shows the basic operation of ImageMixer 3.
Refer to the electronic instruction manual that can be read on PC for detailed instructions about
ImageMixer 3: While ImageMixer 3 is being activated, click "Help" - "ImageMixer Help (F1)" to
display this manual. See the electronic instruction manual for explanation on how to edit video files.
To start ImageMixer 3, double-click the ImageMixer 3 shortcut that was created when it was
installed.
* If there is no ImageMixer 3 shortcut on desktop, choose [Start] - [Programs] or [All programs] -
[PIXELA] - [ImageMixer 3] - [ImageMixer 3].

VIEWING IMAGES RECORDED ON DISC USING PC

* A DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalized on this
DVD video camera/recorder.
1
Insert a disc whose recorded images you wish
to play into the DVD video camera/recorder,
and connect the DVD video camera/recorder
to the USB port of PC.
2
Start ImageMixer 3.
When ImageMixer 3 starts up, the launcher
shown below will appear: Click "Edit Video".
Click
3
Click "Edit new video".
4
The project setting screen will appear: Click
"OK".
It is not necessary change any setting when
using PC to view the images recorded on
disc.
Click
121