Installation Iii ( -Joist Mounting ) I; Installation Iv ( Between Joist Mounting ) - Panasonic FV-08VKML1 Installation Instructions Manual

INSTALLATION INSTALLATION
1. Remove the machine screw by using screw driver,
disconnect plug connector from receptacle and
remove adaptor from fan body before installation.
(Fig.8)
2. Insert the suspension bracket into the adaptor and
secure it to joists by using long screws (ST4.2X20) (Fig.9)
Keep the distance B (1/2 inch, 12.7mm) for the thickness
of ceiling board.
If spacing A between joists is 21 1/4 to 23 1/2
inches (540 to 597mm), connect suspension
II III
bracket and (C4 mark to C4 mark) according
to page. 8 Select the suspension bracket
according to spacing A as shown below.
Spacing A
13 1/4~15 1/2
between Joists
(336~394)
inches (mm)
suspension
suspension
bracket I
bracket
3. Follow steps 4 to 6 of the installation (page 9) to
complete the duct work and wiring.
4. Insert the suspension bracket in
to step 1 of installation , page 8)
5. Insert the fan body into joists. (Fig.10)
IMPORTANT:
Make sure that adaptor claws are properly inserted
into body slots.
II II JOIST MOUNTING- JOIST MOUNTING-
( (
16 1/2~18 3/4 21 1/4~23 1/2
(419~480) (540~597)
suspension suspension
bracket III II III
bracket &
I
to fan body (refering
I
II II
) )
Machine screw
Screw driver
Fan body
Adaptor
2 Long screws
(ST4.2X20)
2 Long screws
(ST4.2X20)
Gloves
Suspension bracket
inches mm ( )
Joist
Conduit
Junction box cover
Duct tape
Gloves
11
Suspension
bracket I
Fig.8
Gloves
Joists
Adaptor
13 1/4~15 1/2 ( 336~394 )
16 1/2~18 3/4 ( 419~480 )
21 1/4~23 1/2 ( 540~597 )
A
Fig.9
1/2 (12.7)
Circular duct
Fan body
Adaptor
Slots
claws
Fig.10