Kolcraft Universal 2 Car Seat Carrier Instruction Sheet page 11

Front Bar
Restraint Straps
Note: Shopping Cart Lever
5
Rear Bar
Secure Car Seat to Carrier by feeding
5
Restraint Straps through Infant Car Seat
belt slots and buckle. Tighten Restraint
Straps.
NOTE: Shopping cart lever will not lock
onto the carrier. To secure infant car seat
to carrier, use restraint straps.
Special Instructions
belt slots: Secure Infant Car Seat to
Carrier by bringing Restraint Straps over
the sides of the seat near the base of
the seat handle and buckle them
together. Tighten Restraint Straps.
Make sure Infant Car Seat is secure. Test
6
Infant Car Seat installation by moving it
in all directions to ensure a tight fit to
Carrier .
NOTE: Your Infant Car Seat may have a
level indicator. It is not necessary for use
with this carrier and the indicator may
fall outside the recommended area. The
level indicator is for use while the Infant
Car Seat is in an automobile.
TO REMOVE CAR SEAT
Unbuckle Restraint Straps and remove
7
them from Car Seat belt slots.
With one hand grasp the Infant Car Seat
8
carry handle (in its upright, carrying
position).
With your other hand, grasp Infant Car
9
Seat near baby's feet. Gently pull up on
the front portion of Infant Car Seat and
remove.
NOTE: Some Infant Car Seats may lock
on, but not on all car seats. With your
other hand, press back shopping cart
lever on Adjustment Bar.
11
for Car Seats without