Setting The Administrator Password - Brother TD-2020 User Manual

Chapter 10
• If you want to reset the settings, use [Device settings] in the "Printer Setting Tool" to return
all settings to their factory defaults. For details, see Device Settings on page 34.
Setting the Time and Date
Adjust the clock to the current time and date. This time and date is displayed in the main screen.
a
Press [ ] (admin key).
b
Press [b], select [Setup], and then press [OK].
c
Press [b], select [Set Clock], and then press [OK]. The clock setting screen appears.
d
Press the number keys to specify the last two digits of the year, two digits for the month and
two digits for the day.
For December 1, 2013, press [1] [3] [1] [2] [0] [1].
e
Press [a] or [b] to select AM, PM or 24, and then press the number keys to specify two digits
each for the hour and minutes.
To enter 2:45 in the AM/PM format, press [b] to select [PM], and then press [c], then [0] [2]
[4] [5].
f
Press [OK]. The main screen appears, and the specified time and date are displayed.
NOTE
The format for the time and date can be changed. Press [
[Time&Date Form] from the parameters, and then specify settings for [Date Format] and
[Time Format].

Setting the Administrator Password

A password can be set so that basic settings specified by pressing [
be accessed. If a password is set, each time [
entered. Access to these parameters can be restricted by setting a password.
a
Press [ ] (admin key).
b
Press [b], select [Admin Password], and then press [OK].
c
Press [b], select [On], and then press [OK].
The password input screen appears.
d
Type in the 4-digit password, and then press [OK].
The password is set.
NOTE
• This parameter can be accessed only when touch panel A (basic control panel) is set.
• After a password has been set, the password input screen appears when [
pressed. Type in the specified 4-digit password, and then press [OK].
76
] (admin key), select [Setup], then
] (admin key) cannot easily
] (admin key) is pressed, a password must be
10
10
] (admin key) is