Brother TD-2020 User Manual page 38

Chapter 3
7 User ID/Password
You can only specify settings when LEAP,
EAP-FAST, EAP-TTLS or EAP-TLS is selected
as the authentication method. In addition, with
EAP-TLS, it is not necessary to register a
password, but a client certificate must be
registered. To register a certificate, connect to
the printer from a web browser, and then
specify the certificate. For details on using a
web browser, see Web Based (Web Browser)
Management (TD-2120N/2130N only)
on page 49.
8 Display the key and password on-screen
If this check box is selected, keys and
passwords will be displayed in plain text (non-
encrypted text).
Communication Modes and
Authentication Methods/Encryption
Modes
 When [Communication Mode] is set to
[Ad-hoc]
Authentication
Method
Open System
 When [Communication Mode] is set to
[Infrastructure]
Authentication
Method
Open System
Shared Key
WPA-PSK
WPA2-PSK
WPA/WPA2-PSK
LEAP
EAP-FAST/NONE
32
3
Encryption Mode
None
WEP
Encryption Mode
None
WEP
WEP
TKIP
AES
AES
TKIP
AES
CKIP
TKIP
AES
Authentication
Method
EAP-FAST/MS-CHAP
v2
EAP-FAST/GTC
PEAP/MS-CHAPv2
PEAP/GTC
EAP-TTLS/CHAP
EAP-TTLS/MS-CHAP
EAP-TTLS/MS-
CHAPv2
EAP-TTLS/PAP
EAP-TLS
To perform higher level security
settings:
When performing certificate verification
with EAP-FAST, PEAP, EAP-TTLS or
EAP-TLS authentication methods, the
certificate cannot be specified from the
Network Setting Tool. After the printer
has been set so that it can connect to
the network, specify the certificate by
accessing the printer from a web
browser.
For details on using a web browser, see
Web Based (Web Browser)
Management (TD-2120N/2130N only)
on page 49.
Encryption Mode
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES