Check Before Riding; Cleaning Your Scooter - Razor Graffiti Owner's Manual

CHECk BEFORE RIDINg

q Collar Clamp
Using a 5mm Allen key, check that the collar clamp bolt is tightened securely. This part is tightened and quality
inspected at the factory but there is a slight chance that the effects of shipping or handling may have caused this bolt
to become loose.
q Wheels and Bearings
Under normal circumstances and conditions, Razor wheels and bearings are maintenance free. Nonetheless, it is
the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper
tightness, and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an
indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. Wheels
other than genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genu-
ine Razor replacement parts may affect your safety and will void your warranty.
q Cleaning your Scooter
Wipe with a damp cloth to remove dirt and dust.
Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or am-
monia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal adhesive.
5
WaRNINg: Wheelies
will break the chalk bar. Other
stunt-type riding reduces your
ability to maneuver and control
the scooter. Take the necessary
precautions, such as wearing
appropriate protective gear and
practice in a area safe for stunt
riding and free from obstructions.
NOTE: Worn wheels, bearings
and chalk cartridges are considered
normal wear-and-tear and are not
covered by the Razor Warranty.