Operation (Other Functions); Analyzing Files; Editing The Beat Grid; Adjusting The Jog Dial's Midi Message Sending Interval - Pioneer DDJ-WeGO2 Operating Instructions Manual

Operation (other functions)

Analyzing files

! This function is operated on the computer. It cannot be operated on
this unit.
We recommend analyzing files before playing them with VIRTUAL DJ LE.
When files are analyzed, the track's BPM and key are detected and the
beat grid is attributed automatically.
1 On the browser screen, select the track to be analyzed
and right-click it.
The track options menu is displayed.
2 From the menu, click [BPM] > [Re-Analyze] to start
analyzing.
When multiple tracks or folders are selected, click [Scan for BPMs] on
the menu displayed after right-clicking.
! When analysis is completed, the icon at the beginning of the track
item switches from

Editing the beat grid

! This function is operated on the computer. It cannot be operated on
this unit.
1 Load the track whose beat grid you want to edit onto
a deck.
2 Select the loaded track on the browser screen and
right-click it.
3 Select [BPM] > [Manual Edit].
The [Adjust BPM Values] screen is displayed.
1
2
1 Input the [BPM] value directly or use the [ < ] and [ > ] buttons to
adjust the grid spacing.
2 Move the slider or use the [ < ] and [ > ] buttons to move the grid
position.
3 Use the [-1/4] and [+1/4] buttons to move the grid position in
units of beats.
18
En
to .
3
Adjusting the jog dial's MIDI
message sending interval
This unit is equipped with a mode for adjusting the jog dial's MIDI mes-
sage sending interval.
Depending on your computer's operating system and specifications, the
jog dial may not operate properly if the sending interval of MIDI mes-
sage for JOG dial is too short. In this case, follow the procedure below to
adjust the MIDI message sending interval.
! The value set in the jog dial MIDI message sending interval adjust-
ment mode is retained even when this unit's power is turned off.
1 Turn on the power while pressing the right deck's
[CTRL A] button and [FX1] button.
The unit starts up in the jog dial MIDI message sending interval adjust-
ment mode. Wait until the startup illumination finishes.
2 Press the [SHIFT] button and select the jog dial's MIDI
message sending interval.
The sending interval changes in units of 1 ms each time the [SHIFT]
button is pressed.
The jog dial's MIDI message sending interval is indicated by how the
LEDs on the channel level indicator light.
MIDI message sending
interval
3 ms*
4 ms
5 ms
6 ms
7 ms
8 ms
9 ms
10 ms
11 ms
12 ms
13 ms
*: Setting upon purchase
3 Press the [f] button.
The sending interval is set.
4 Turn the power off.
The mode for adjusting the jog dial's MIDI message sending interval
adjustment is canceled.
Channel Level Indicator